Bently Nevada 1/2-inch Sealtite Flexible Conduit 14847-10 in stock

The Accelerometer Mounting Kit protects an accelerometer from adverse physical and environmental conditions. The mounting kit’s rugged design is both water-tight and dust resistant. The mounting kit is available in three configurations to house various accelerometers. All kits consist of a flat cover with a housing base, a set of three 1/4-in 20 UNC x 0.62 mounting screws with lock washers, a cable grip, an O-ring, and a gasket. One configuration adds an optional dome cover. Another configuration adds an optional extension and an optional dome cover. All kit designs mate with 12-mm (1/2-in) flexible or rigid conduit. Properly installed kits, using an accelerometer mounting base and rigid or flexible conduit, meet API 670 requirements. The conduit is ordered as an accessory. The mounting base is an accessory with the 23732, 330400 and 330425. Prior to mounting, the machine surface where the housing will be installed must be spot faced. An optional 303 stainless steel accelerometer mounting kit for extra protection in corrosive environments is also available. It can be ordered under part number 164952-AA-BB.

1/2-inch Sealtite Flexible Conduit 14847-AA A: Option Description Assembly Length Option Order in increments of 1 foot. Minimum Length: 01 = 1 ft Maximum Length: 99 = 99 ft Example: 12 = 12-foot assembly.

Product’s Character: